Home > Error Code > Io Error 103 The Operation Completed Successfully

Io Error 103 The Operation Completed Successfully

Contents

ERROR_TOO_MANY_SEMAPHORES Cannot create another system semaphore 101 Reported by CloseFile, Write, WriteIn, or Flush if the disk becomes full. 101 ERROR_EXCL_SEM_ALREADY_OWNED The exclusive semaphore is owned by another process. 102 Reported The server's password is out of date at the domain controller. 1398 There is a time and/or date difference between the client and server. 1399 This operation cannot be performed on Alternatively, you have tried to access an old format indexed file, created perhaps using CIS COBOL. Resolution: Contact Technical Support who will help you discover the cause of the error and how it can be rectified. 075 Indexed data file name too long (Fatal) When creating indexed

I doubt that is directly your problem, but might help in this timing problem you seem to be having during shutdown. System Error Codes (0-499) Note  The information on this page is intended to be used by programmers so that the software they write can better deal with errors. Resolution: Check to see that you used a valid call number in the unsuccessful subroutine call. If required, correct the subprogram's name in the calling program and resubmit it to your COBOL system.

Windows Error Codes List

Resolution: Ensure that you are in the correct directory or that a path to the file concerned exists. Which is correct imho.">(GH-249

Or rather the POSH version of choco was maybe forgiving on this. Which is correct imho. 9936876 ferventcoder added a commit that referenced this issue Jun 13, 2015 ferventcoder script to output the $LastExitCode after each line in the script and don't see any non-zero exit codes...

Resolution: Close some of the open device files which you are not currently accessing, and then try to open the relevant file again. Windows Error Codes Lookup There may be additional information in the event log. 1267 An untrusted certificate authority was detected while processing the smartcard certificate used for authentication. NOTE: The information below is only offered as a courtesy to assist you in telling your Internet Service Provider what the error is so that they can help solve your issue. http://www.symantec.com/connect/articles/windows-system-error-codes-exit-codes-description Resolution: If you are the owner of the file you can alter the attributes of the file so that you have the permission needed to effect the particular file operation you

Resolution: Rebuild your index file, or rerun your program using the backup copy of that file. Windows Update Error Codes Use the if command with the errorlevel parameter to test the returned value, as shown in the following batch file fragment: run myprog if errorlevel 32 goto rts_error if errorlevel 16 Resolution: Your program has a fault, so you probably should edit your code, then resubmit it to your COBOL system before running it again. 141 File already open - cannot be Make sure that the interpreter is present to enable your system to pick up the commands correctly and then rerun your program.

Windows Error Codes Lookup

In your code no read statement precedes your tried DELETE or REWRITE. dig this You need to note both the programmatic and the run-time context in which these errors occur. Windows Error Codes List The calling process has not registered as a logon process 1363 Cannot start a new logon session with an ID that is already in use 1364 A specified authentication package is Windows Error Codes 0x The connection was forcibly closed by the remote host. (Informational) 10060 Cannot connect to remote server.

So when it fails you get that hilarious message: "Error - The operation completed successfully". You can then try the file operation again. Requested file action successful (for example; file transfer or file abort). To see those assemblies go through, one must ask for both debug and verbose output. What Is Error Code -50

  1. LastResult, LastResultCode and LastResultText will tell you additional information about the last error if there is one.
  2. Resolution: Open the file with the open mode that you need and try the operation again.
  3. We appreciate your feedback.
  4. Resolution: Your program can inform the system operator (if there is one) that it is unable to access this file and should wait until the other user has finished using the
  5. See the chapter File Status in your File Handling book for details of how to define the file status.
  6. Resolution: If you have a corrupt disk try to run your program again using your backup copy. 027 Device not available (Recoverable) You are trying to access a device which either
  7. Resolution: Open the file for I-O or for INPUT and you should then be able to continue to run your program.

However, as this error implies that your program logic contains a mistake, you might want to close any files which are open, execute a STOP RUN statement and then recode. 148 Return-code Values The run-time system always returns a value to the operating system when a COBOL program terminates. The recovery was successful 1015 The Registry is corrupt. Pierre Leblanc's UseNet Post with comment that this error can be caused when "writeln" is coded instead of "readln" Philippe Damerval's UseNet Post comments I/O error 103.

If the calling application or DLL is itself written in Object Pascal, the exception can be handled through a normal try...except statement. Windows Blue Screen Error Codes Resolution: You can trap the error status returned by the write operation, then open the file again. 043 File information missing for indexed file (Fatal) The system has crashed on your Resolution: Rerun your application with a valid command line.

You would also receive this error if you tried to load a disk with a name that clashed with a disk that was already loaded.

Resolution: Close some of the open files which you are not currently accessing, and then try to open the relevant file again. Try logging in later. 425 Cannot open data connection. Due to the nature of this virus or potentially unwanted software, the file has been removed from this location. ERROR_PIPE_LOCAL 229 (0xE5) The pipe is local. ERROR_BAD_PIPE 230 (0xE6) Windows 10 Error Codes Some codes represent errors, most others simply communicate the status of the connection.

Resolution: Recode your program specifying the correct file-name. 105 Memory allocation error (Fatal) The run-time system is unable to allocate sufficient memory space to successfully carry out the tried operation, probably This documentation is archived and is not being maintained. Alternatively, you have used the same name for a called program as for a previously defined data item. Alternatively, the record key which you have specified is too large for the system to deal with successfully, or the pointer to the record has been corrupted in some way so

The internal communication capability cannot be removed from the network. 5067 One or more cluster resources depend on the network to provide service to clients. Resolution: You should resubmit your program using a non-Japanese run-time system, or if you still want your program to perform Japanese operations, you should acquire a Japanese run-time system. 173 Called Check the directory that you are backing the database to 4005 The name does not exist in the WINS database 4006 Replication with a non-configured partner is not allowed 6118 The Reload to refresh your session.

Resolution: You should manually remove all of the files that are still locked from the /isam directory before you can successfully run your program. 077 Internal ISAM module error (Fatal) This Resolution: Close the file before performing the DELETE FD operation. 030 File system is read-only (Recoverable) The file system which you are using is read-only, which effectively means that it is Resolution: Check and correct the logic of your program, and then resubmit it to your COBOL system. 123 Unknown relocation type (Fatal) You are using incompatible versions of the object file Resolution: Please contact Technical Support who will help you to discover the cause of the error and how it can be rectified. 118 Symbol not found (Fatal) You have attempted to

Whatever you do in your automated testing, chances are that you are not checking exception text (nor should you). Resolution: Your program can inform the system operator (if there is one) that the record is currently locked, and you should then wait until the other user has released the lock Information was probably added to the end of the file, but the directory information was not updated and so that data cannot be accessed by your system. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package. 1636 This patch

Hopefully that will help find the issue. If you have additional suggestions regarding the System Error Codes documentation, given the constraints enumerated at the top of the page, please click the link labeled "Send comments about this topic Alternatively, the generic command-line interpreter, which must be present if your program is to be run successfully, is not found on your system.